Signal Generators

Every lab needs a signal generator once in a while. They are useful to see if your acquisition program is working properly, to test why a certain piece of equipment is not working properly or to generate cues and targets at behavioural paradigms. Listed below are different generators, built using arduinos and other microcontrollers. They have different degrees of complexity and capabilities, so it would be wise to briefly look through them and see what fits you best!

The arduino waveform generator is a pretty straight forward project that is able to generate four different waveforms from 1Hz to 50kHz. Gain, frequency, modulation and waveform type are controlled by nobs.

The analogue function generator Delivers sine and triangular waveforms ranging from 20Hz to 300kHz using a XR-2206 integrated circuit.
analogue waveform generator

Atmel Xmega USB/Serial Arbitrary Waveform Generator runs using a boston android XMEGA evaluation board and is able to deliver square, sine, triangular and arbitrary waveforms in between 5Hz and 20kHz. This one is not a stand alone system, which means that to set a new waveform type, one would have to have the board connect to a computer at all times.
arbitrary waveform generator

Simple waveform generator seems to be the most straight forward of all projects, requiring only a potentiometer, a couple of resistors and push buttons. The trade off is that with the present sketch, waveforms of only up to 170Hz can be generated. It generates sawtooth, square, triangular and sine waveforms.
arduino due waveform generator

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: